How To Enable gpedit.msc In Windows 10 Home Edition?

While using Group Policy Editor, gpedit.msc not found is a common error in today’s world. We need a manager, be it in real-world situations or digital. Windows settings can also be configured or customized according to the user’s needs.

Group Policy Editor (gpedit.msc) is a Windows configuration manager that allows users to configure various aspects of the system without going through the Windows Registry. gpedit.msc windows 10 is a crucial tool to have. Windows 10 Home editions and Windows 10 Pro have many differences.

The significant aspect that makes these differences is the network management potentials of the two. Other contrasting behaviors are the absence of Group policy editor WIndows 10 and Remote Desktop.

If we look deeply into the matter, Group Policy Editor is absent in all Windows Home Operating Systems. It includes Windows 7, Windows XP, Windows 8.1, along with Windows 10.

RecommendedBest Data Recovery Software

How To Enable gpedit.msc In Windows 10 Home Edition

What is gpedit.msc not found error And How to Resolve this?

Are you, too, getting an error of gpedit.msc not found? Well, you are not alone. To sort the problem of a missing group policy editor from your Windows 10 system or just getting this error message, you should first check the edition of your Windows 10 edition Operating System.

This problem is a concerning downside because a user needs the group policies in every case, even just for managing and handling the local system. The local group policy is more impressive than using Windows Registry for modification in the settings. Changes made through Windows Registry are way too riskier for the device.

Modifications in the settings via Registry might have adverse system impacts whereas, it is relatively easy for almost all the group policy settings to revert.

In the guide below, we have created a step-by-step procedure to install the Group Policy Editor, i.e., gpedit.msc Windows 10. The following article can also be used in Windows 7 as well as Windows 8.

Download and Install GPEdit.msc in Windows 10 Home Using PowerShell script

Step #1. The very first to use the PowerShell script is to download the GPEdit Enabler script. You can download the script from the link below:

GPEdit Enabler for Windows 10 Home Edition (393 bytes, 176,744 hits)

Step #2. We will use this straightforward PowerShell script to install the disappeared Group Policy editor Windows 10 Home edition, causing a ‘gpedit.msc not found‘ error.

Step #3. The next step is to run the downloaded file. For this, right-click the recently downloaded gpedit-enabler.bat file and chose the option of Run as Administrator.

Step #4. The previous step is going to start the process of installation. After this, depending on the performance of the system, the process might take some time.

Step #5. After the installation process gets completed, you need to close down the command prompt window. For this, hit any key.

cmd

Step #6. After the completion of the installation, you are good to go. In case policies are still not working, you can restart the system once. It will sort the issue. Restart, if things are fine, is not necessary, though.

Opening the Windows 10 Group Policy Editor After Installation

After you are done with the group policy editor installation, it should be easier for you to access local group policies. You will now have access to editing already implemented group policies on your system.

For opening the Windows 10 Group Policy editor, start the Run dialog box. You can do this by pressing together the R alphabet and Windows key. Now in the dialog box, type gpedit.msc and hit enter. You can also select the OK button present.

It could open gpedit.msc Windows 10 Home for you.

It is a fantastic method for installing gpedit.msc for most of the users. However, there are many complaints that the above method, on the one hand, easily enables the group policy editor, but almost no settings work in the Home edition of Windows 10.

In your case, if the above methods do not let any settings work properly, you should go for trying the third method we discussed below.

Enable Group Policy Editor in Windows 10 Home Using GPEdit Installer

By default, the Group Policy Editor is not included in Windows 10; our system must have a downloaded editor first. We have provided you the below link to do so. Click on the given link to download the editor.

Alternative download link

It is a straightforward setup file. On running, it will simply install and configure the Group Policy Editor for your Windows 10 Home operating system.

Correct Method For Installing gpedit.msc Windows 10:

There are two cases for the system to look into:

  1. 32-bit Windows (x86)
  2. 64-bit Windows (x64)

If your system is 32-bit Windows (x86), it would be easier for you to install Group Policy Editor. It could be done smoothly without the involvement of many obstacles. You can easily access the Group Policy Editor. For this, go to the Microsoft Management Console. You can do this by taking action of Run >> gpedit.msc.

If you have Windows 64-bit (x64), you must do some extra steps once you run the installer. For Windows 64-bit (x64) systems, below are some steps that need to be done for your system. Follow the two steps given below. You have to do this after running the installer:

Step 1: After running the installer, you have to go to the C:\Windows\SysWOW64 folder.

Step 2: Once you find the folder, the next and final step is to copy the below-mentioned folders and files from the C:\Windows\SysWOW64 folder to the C:\Windows\System32 folder.

“GroupPolicy”
“GroupPolicyUsers”
gpedit.msc

Doing this step, for Windows 32-bit (x32) users and Windows 64-bit (x64) users will ensure you run the editor from the Run dialog.

Solving common problems with running gpedit.msc

Once you install the editor, there is less chance of getting any error. However, many users are complaining of errors even after the installation and smooth functioning of the group policy editor windows 10. For example, the “MMC cannot create a snap-in” error message is quite common. Below is the method to get rid of the problem.

If you are stuck with an error message of an “MMC cannot create a snap-in” when you are initializing gpedit.msc, you can try the steps given below to solve the problem.

Step 1: The first step is to search for the C:\Windows\Temp\gpedit\ folder. Your task is to make sure that the above folder exists in its place.

Step 2: We have provided you with a file below. You have to download the following zipped file.

Step 3: Next, unzip the given file to C:\Windows\Temp\gpedit\ once you download it. Doing this should replace two existing files x86.bat and x64.bat.

File to download and unzip: gpedit-temp-files-x86x64 (1.3 KiB, 59,655 hits)

Step 4: After unzipping the file on the mentioned folder, the next step is to run:

  • x86.bat if you are running a 32-bit Windows 10 Operating System
  • x64.bat if you are running a 64-bit Windows 10 Operating System.

Note:

You also have to keep in mind that you are running the batch files as an Administrator. You can do this by just right-clicking the file and selecting the option of “Run as administrator.”

Once you do the above steps, you will not get the “MMC cannot create a snap-in” error message anymore. It will ensure the proper installation and working of gpedit.msc Windows 10 Home edition.

Download Group Policy Editor for Windows 10 Using Third-Party App- Policy Plus

Suppose you don’t want to go with those mentioned above, downloading and running various files. In that case, you can go with a third-party application to complete your desired task of installing Group Policy editor, gpedit.msc windows 10.

One such fantastic app is Policy Plus. It is a third-party app and easily can be used as an alternative to the built-in Group Policy editor. The application’s interface is quite similar to GPEdit.

One crucial advantage of opting for Policy Plus is that it provides the user with a search option with a fancy interface. Here, you can merely enough search the necessary policies and configure accordingly.

To get benefitted from the app, you have to go through the simple guide given below.

Step 1: The first step is to download Policy Plus. We have provided you with the link to do so.

Policy Plus (10.3 KiB, 29,638 hits)

Step 2: Go to the folder where you saved the downloaded file and run Policy-Plus.exe. It is a portable application, so there is no need for installation. It will open immediately after clicking it.

Step 3: You can quickly modify the policies precisely in the same way as you do in the Windows built-in group policy editor.

policy plus

Conclusion

By following the methods mentioned above, you must have enabled gpedit.msc in your Windows 10 Home system and got rid of gpedit.msc not found error message.

One point to remember here is that these techniques are helpful only when choosing to have a local group policy editor. But in case you’re a domain administrator and still want to modify Windows 10 Homegroup policies using Windows Server Active Directory, these approaches are not successful. It is because Windows 10 Home does not allow Active Directory domain involvement.

Recommended:

Leave a Comment

%d bloggers like this: